Command Manual – System Maintaining and Debugging
H3C S3610&S5510 Series Ethernet Switches
View
Any view
Parameters
by-linenum: Specifies to display the number of each line.
Description
Use the display this command to display the validated configuration information under
the current view.
After finishing a set of configurations under a view, you can use the display this
command to check whether the configuration takes effect.
Note that:
A parameter is not displayed if it has the default configuration.
A parameter is not displayed if the configuration has not taken effect.
When you use the command under interface view, protocol view or protocol child
view, the command displays the configuration corresponding to the current view.
Examples
# Display configuration information of the current view (the display information varies
with configuration).
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] display this
#
user-interface con 0
user-interface vty 0
history-command max-size 256
user-interface vty 1 4
#
return
1.1.13 display version
Syntax
display version
View
Any view
Parameters
None
Chapter 1 Basic Configuration Commands
1-13