Sharp IV-S30 User Manual page 86

Setting Measurement Conditions
2 Setting details
[TYPE MEAS COND]
1OBJECT TYPE NO.
2SELECT CAMERA CAM1&2 CAM1&NG-IMG
3IMG PRE-PROCESS (TO NEXT SUB-MENU)
[IMG PRE-PROCESS]
3
1ADJ.IMG GRAY
2
3 OMPARE IMGS
OPS-MENU RETURN LOCK
[COMPARE IMGS]
1CALC.TYPE
2CALC.AREA
OPS-MENU RETURN LOCK
The list of settings which may be selected at item "3COMPARE IMGS" is as follows.
SELECT
CAMERA
IMG
NO (none)
CAM 1
(camera 1)
CAM 2
(camera 2)
CAM 1&2
(cameras
1 & 2)
(*2)
- The reference images T1 and T2 (*1) and the size of the areas covered by I1 and I2 (the images
taken by cameras 1 and 2) (*2) may be set in item "2CALC. AREA."
To the next page
00(0~63) NO YES
CAM1(1~2) NO YES (TO NEXT SUB-MENU)
CAM1(1~2) NO YES (TO NEXT SUB-MENU)
NO CAM1 CAM2 CAM1&2 (TO NEXT SUB-MENU)
NO SUBI1-T1 DIFF.ABS I1-T1
MOVE UP.L(224,208) LO.R(287,271) REG DISP
1CALC.TYPE
Comparative calculations of differences between images will not be carried out.
Comparative calculations of differences between images will not be carried out.
None
The reference image T1 (* 1) is subtracted from the image taken by camera 1.
Subtraction I1-T1
The absolute value of the difference is calculated between the reference image
The absolute value of the
T1 (* 1) and the image taken by camera 1.
difference between |I1-T1|
Comparative calculations of differences between images will not be carried out.
None
The reference image T2 (* 1) is subtracted from the image taken by camera 2.
Subtraction I2-T2
The absolute value of the difference is calculated between the reference image
The absolute value of the
T2 (* 1) and the image taken by camera 2.
difference between |I2-T2|
The image taken by camera 1 is subtracted from the image taken by camera 2.
Subtraction I1-I2
The image taken by camera 2 is subtracted from the image taken by camera 1.
Subtraction I2-I1
The absolute value of the difference is calculated between the image taken by
The absolute value of the
camera 1 and the image taken by camera 2.
difference between |I2-I2|
1. Select "CAM1," "CAM2," or
"CAM1&2" and press the SET keys.
2. Move the cursor to TO NEXT SUB-
MENU and press the SET key.
Contents
3-24