Sharp IV-S30 User Manual page 121

Continued from page 7-3 or 7-4
"NORMAL" is selected for the window.
[EVALUATION COND]
1
2CONDITION SET
3
000~1024
4TOTAL AREA
000000~245760
5OBJECT AREA 000000~245760
6X DIRECT SPACE 000.0~511.0
7Y DIRECT SPACE 000.0~479.0
8X FILLET WIDTH 000~511
9Y FILLET WIDTH 000~479
0TEST
EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
OPS-MENU RETURN LOCK
"BINARY-IMG-MASK" is selected for the window.
[EVALUATION COND]
REGISTER NO. 0
CONDITION SET RESET AUTO(+10%)
NUMBER OF OBJ 000~1024
TOTAL AREA 000000~245760
OBJECT AREA 000000~245760
X DIRECT SPACE 000.0~511.0
Y DIRECT SPACE 000.0~479.0
X FILLET WIDTH 000~511
Y FILLET WIDTH 000~479
TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
OPS-MENU RETURN LOCK
- Before setting the upper and lower limits between which the evaluation result is
acceptable, execute item 0(9)TEST, and check the test results.
Select "RETURN" to return to the [MEAS COND] menu, and
select "NUM CALC" and press the SET key.
To the next page
[TEST RESULT] [OUTPUT]
= 004 OK NO
= 005200 OK NO
= 000110 OK NO
000108
DX=030.0 OK NO
029.0
DY=030.0 OK NO
028.0
FX= 010 OK NO
009
FY= 010 OK NO
009
[TEST RESULT] [OUTPUT]
= 004 OK NO
= 005200 OK NO
= 000110 OK NO
000108
DX=030.0 OK NO
029.0
DY=030.0 OK NO
028.0
FX= 010 OK NO
009
FY= 010 OK NO
009
7-5
BGA/CSP Inspection
- Page 3-16
You can set the output destinations using
the up and down keys.
(No, Y0 to Y7, C000 to C127)
- Page 3-16
You can set the output destinations using
the up and down keys.
(No, Y0 to Y7, C000 to C127)
7