Sharp IV-S30 User Manual page 158

Distance and Angle Measurement
Continued from page 14-2 (OBJECT: DST)
[DIST&ANGLE COND]
1OBJECT
2DISTANCE NO.
3COND.1
4COND.2
5DISTANCE EVALUAT 000.0~+702.0
6RUN A TEST
REGISTER NO.
DISTANCE
OPS-MENU RETURN LOCK NUM-CALC OUT-COND
Æ The distance type when distance between two points has been selected
Point 1 (X1, Y1)
Æ The distance type when distance between X coordinates has been selected
Point 1 (X1, Y1)
Æ The distance type when distance between Y coordinates has been selected
14
The distance between Y
coordinates (
Select "NUM-CALC" and press the SET key.
To page 14-6
AUX DST ANGL
00(0~15) NO DIST-BETW-2PT DIST-BETW-X
DIST-BETW-Y
MEAS-REG NO MDL0 AUX NO
MEAS-REG NO MDL0 AUX NO
[TEST RESULT]
130.0
EXEC
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
X X X X X X X X X X
The distance between 2 points
2
(X2-X1) +(Y2-Y1)
Point 2 (X2, Y2)
The distance between X
coordinates ( X2-X1
Point 2 (X2, Y2)
Point 1 (X1, Y1)
Point 2 (X2, Y2)
2-Y1
You have to specify these settings.
[OUTPUT]
OK NO
See the description for "7 RUN A
TEST" on the page 14-2.
2
14-4