Table of Contents
Advertisement
Continued from the previous page
1REGISTER NO.
0(0~3)
2REFERENCE IMG
NEW EXIST000(001~010)
3REF-IMG AREA
MOVE UP.L(224,208) LO.R(287,271) CONTRAST SR
REG DISP
4SEARCH AREA
MOVE UP.L(216,200) LO.R(295,279)
5DTECT COORD
CENTER FREE(255,239)
6CONTR.PIXEL
1 2 3
7MATCH LVL(CONTR)
+05000
8MATCH LVL
+07000
Detection coordinate
OPS-MENU RETURN LOCK EVALUATION
Ë Setting procedure for the reference image
» When you want to register a new reference image
2REFERENCE IMG
2
3REF-IMG AREA
1. Select "NEW" on the "1 REFERENCE IMG" line.
2. Set "3REF-IMG AREA" and press the SET key.
» When you want to use a reference image that is already registered.
2REFERENCE IMG
3REF-IMG AREA
1. Select "EXIST" on the "2REFERENCE IMG" line, and press the SET key.
2. Select the number of the reference image you want to use using the left and right keys
(select digits) and the up and down keys, and press the SET key. To confirm the reference
image, select "DISP" for the "3REF-IMG AREA" line.
Note: After selecting "EXIST" on the "2REFERENCE IMG" line, register the reference
image in the "3REF-IMG AREA." The reference image matching the specified number
will be refreshed.
Ë Number of reference images that can be registered
Controller
IV-S33M
IV-S32M
IV-S31M
Ë A registration example
Select "EVALUATION" (or select "EVALUATION" on the
[MEAS COND] menu) and press the SET key.
To the next page
Page 3-15
Reference image area
Search area
1
NEW EXIST000(001~010)
MOVE UP.L(224,208) LO.R(287,271) CONTRAST SR
REG DISP
2
1
NEW EXIST000(001~010)
MOVE UP.L(224,208) LO.R(287,271) CONTRAST SR
REG DISP
2
Number of reference images that can be registered
Maximum 600 (the total size of all reference images must be less than 8 screens)
Maximum 300 (the total size of all reference images must be less than 3 screens)
Reference image
Search area
13-3
Multiple degree of match inspection
If there are 100 reference images registered
One screen: 512 x 480 pixels
Advertisement
Table of Contents
