Continued from the previous page
TM0 to TM7
CN0 to CN7
- See page 16-8 for details about the auxiliary relays C000 to C127.
To the next page
Output to the parallel I/F, general purpose serial I/F and computer link
Y0 to Y7
Output to the general purpose serial I/F or computer link
Y8 to Y15
A timer terminal will be turned ON for a set amount of time (set value
000 to 999, unit 10 ms) after the timer instruction is input.
When the timer instruction input is turned OFF, the timer terminal will
be turned OFF.
While the counter reset relay is OFF, if a counter instruction input is
cycled from OFF to ON, the number of times you set (set value 000
to 999), the counter terminal will be turned ON. (Decrementing type)
When the counter reset relay is turned ON, the counter terminal is
Create a circuit to turn the counter reset relay ON and OFF on the
row following a row that containing a counter instruction.
The output relay on the row where the cursor is located will be deleted.
Timer set value
Counter set value
Resetting the CN0