Θ Angle Correction Image Display - Sharp IV-S30 User Manual

[6] θ angle correction image display
Select "YES" or "NO" to display a θ angle corrected image on the MAIN OPS MENU.
On the MAIN OPS MENU, move the cursor to "OPS-CND" item, and press the SET key.
[TYPE RUN COND]
5SHOW BINARY IMG YES NO
6SHOW
7OPS MENU DISPLAY MAINYES CHNG-EVALNO PC-MNTRNO
1
SHOW
FIX θ IMG
YES
NO
Ë Ë Ë Ë Ë Operation procedure
1. On the [TYPE RUN COND] menu, move the cursor to item "SHOW θ FIX IMG" with the up and down
keys, and press the SET key.
2. Move the cursor to "YES" or "NO" with the left and right keys, and press the SET key.
Ë Ë Ë Ë Ë Display examples
(Reference image)
- When the θ
angle correction
image display
mode has been
set to YES
- When the θ
angle correction
image display
mode has been
set to NO
FIX IMG YES NO
2
Description
A θ angle corrected image will be
displayed on the MAIN OPS MENU.
A θ angle corrected image will not be
displayed on the MAIN OPS MENU.
(Measured image)
2-9
Setting the Operating and System Conditions
Display when the MONITOR
OUTPUT is set to
"CAM1/CAM2/NG-IMG"
Position of
reference image
2