Sharp IV-S30 User Manual page 148

Multiple position measurement
Continued from page 12-2: When E (edge detection) is selected
1REGISTER NO.
2DTECT SHAPE
3SEARCH AREA
4DTECT MODE
5SEARCH DIRECTION
6AUTO REGIST
7THRESHOLD
OPS-MENU RETURN LOCK EVALUATION
- With each press of the ESC key, the display will change between all items and each item.
- Depending on the setting in item 2 above, the information displayed on lines 3 and 5
will vary.
Selection on 2
RECT (rectangle)
LINE (straight
line)
CIRC-L (circle)
ELIP-L (oval)
A registration example
Shown below is a shape to be detected (straight line) and a detection mode (changed point).
Select EVALUATION" (or select EVALUATION" on the [MEAS COND] menu) and press the SET key.
To the next page
1(0~3)
RECT(NO ARTIF ARTIF) LINE CIRC-L ELIP-L
MOVE UP.L(224,208) LO.R(287,271)
CHNG POINT DRK BRT BRT DRK CENTER(BRT DRK)
HORIZ( ) VERT( )
EXEC
GRYS.050(0~255) EDGE.W2(1~8)
FLAT.W04(1~16)
Display on 3
MOVE: UP.L (224, 208), LO.R (287, 271)
MOVE: S.PT (224, 240), E.PT (287, 240)
CENTER (256, 240) RAD.(032), S.PT (256, 208)
CENTER (256, 240) RAD. (032, 032), S.PT (256,
208)
- Page 3-4 to 3-6, 3-13
- Page 3-12
Detection area
(When the detection shape
is a rectangle)
Display on 5
HORIZ (
START-PNT
END-PNT
CLOCK-WISE, COUNTER-CW
12-4
) VERT ( )
END-PNT
START-PNT