Sharp IV-S30 User Manual page 22

From the previous page
When you want to specify MEASUREMENT 0 (CAM1/2)
- The only measurement program available in this mode is "POSI-DEVIATION"
[TYPE MEAS COND]
1OBJECT TYPE NO.
2SELECT CAMERA
3IMG PRE-PROCESS
4MEASURE 0 CAM1
5MEASURE 0 CAM2
1
6MEASUREMENT 1NO
7MEASUREMENT 2NO
8MEASUREMENT 3NO
9MEASUREMENT 4NO
OPS-MENU SAVE LOCK TITLE FINAL-CALC FINAL-OUTPUT I/O SYSTEM
[MEAS 0 CAM1 COND]
1MEAS SELECTION
3
2COMPARE IMGS
3CHNG GRAY LEBEL
4SPACE FILTER
OPS-MENU RETURN LOCK
When you want to choose any of MEASUREMENT 1 to 4.
- You can select from 10 measurement programs.
[TYPE MEAS COND]
1OBJECT TYPE NO.
2SELECT CAMERA
3IMG PRE-PROCESS
4MEASURE 0 CAM1
5MEASURE 0 CAM2
6MEASUREMENT 1NO
7MEASUREMENT 2NO
2
1
8MEASUREMENT 3NO
9MEASUREMENT 4NO
OPS-MENU SAVE LOCK TITLE FINAL-CALC FINAL-OUTPUT I/O SYSTEM
[MEASUREMENT 1]
1MEAS SELECTION
3
2SELECT CAMERA
3CHNG GRAY LEBEL
4SPACE FILTER
OPS-MENU RETURN LOCK
To chapter 4 to 14
00(0~63) NO YES
CAM1&2 CAM1&NG-IMG
(TO NEXT SUB-MENU)
NO (MEAS-COND) NO
NO (MEAS-COND) NO
2
(MEAS-COND)
(MEAS-COND)
(MEAS-COND)
(MEAS-COND)
NO POSI-DEVIATION
4
NO
NO YES(00.0TIMES γ+ γ - CHNG-L INCRS-M)
NO NUM-OF-TIMES 0(0~5)
00(0~63) NO YES
CAM1&2 CAM1&NG-IMG
(TO NEXT SUB-MENU)
NO (MEAS-COND) NO
NO (MEAS-COND) NO
(MEAS-COND)
(MEAS-COND)
(MEAS-COND)
(MEAS-COND)
NO POSI-DEVIATION CHK-DEG-MATCH
INSPECT-LEAD INSPECT-BGA/CSP
MEAS-BIN-AREA CNT-BIN-OBJ LABEL-BIN-OBJ
POINT-MEAS MULTI-POSI MULTI-MATCHES
CAM1 CAM2
NO YES(00.0TIMES γ+ γ - CHNG-L INCRS-M)
NO NUM-OF-TIMES 0(0~5)
1-11
Setting and Operating Outline
1. Select item 4 or 5 using the
up and down keys.
2. Select "NO" using the left and
right keys.
3. Select item 1 on the lower
half of the screen, and press
the SET key.
4. Select the "POS-DEVIATION"
item using the left and right
keys, and press the SET key.
- "NO" in item 4 or 5 will
change to "POS-
DEVIATION."
(Two positions marked)
When "CAM1&NG-IMG"
is selected for "2
SELECT CAMERA," the
display will be different.
- See page 3-3.
1. Select item 6, 7, 8, or 9
using the up and down keys.
2. Select "NO" using the left and right
keys.
3. Select item 1 on the lower half of
the screen, and press the SET
key.
4. Select the measurement program
that you want to use using the left
and right keys, and press the SET
key.
- The "NO" in item 6, 7, 8, or
9 will change to the measure-
ment program that you have
set.
4
Displayed when the IV-S32M/S33M
is used.
1