Sharp IV-S30 User Manual page 190

PC Function
Continued from the previous page
(3) Ladder circuit 2 (setting output signals)
[FINAL OUTPUT COND]
1PAGE NO.
2SET POSITION
1
3INPUT SIGNAL
4LOGIC SYMBOL
5OUTPUT SIGNAL OUT Y00(0~15)
2
OPS-MENU RETURN LOCK
[PAGE0]
INPUT0
LOGIC
INPUT1
LOGIC
INPUT2
LOGIC
INPUT3
LOGIC
1. Move the cursor to item "2SET POSITION" with the up and down keys, and press the SET key.
- Move the cursor to the row where a ladder circuit output relay will be placed, and press the SET
key. An output relay can only be placed only on rows where input signals have already been
placed.
2. Move the cursor to item "5OUTPUT SIGNAL" with the up and down keys, and press the SET
key.
3. Select the kind of output signal and the number (set value). After moving the cursor to the desired
output signal with the left and right keys, select a number (set value) with the up and down keys,
and press the SET key.
- The output symbol and signal will be displayed on the row specified in step 1.
Display example:
16
To the next page
0(0~7) NO YES
MOVE
AUX-RLY C000(0~127) EXT-INP X0(0~7)
TMR TM0(0~7)
AN00(0~15)
TMR TM0(0~7)
CNTR CN0(0~7)
DEL
0 1 2 3 4
C000
[PAGE0] 0 1 2
INPUT0
C000
LOGIC
CNTR CN0(0~7)
OUT Y00(0~15)
DEL
AUX-RLY C000(0~127)
SET-VL000(000~999)
SET-VL000(000~999)
5 6 7 OUT
3 4 5 6 7 OUT
Y00
16-14
3