Message Display - Sharp IV-S30 User Manual

Setting the Operating and System Conditions

[3] Message display

Select "YES" or "NO" to display messages on the MAIN OPS MENU.
On the MAIN OPS MENU, move the cursor to "OPS-CND" item, and press the SET key.
2
Setting to "NO" reduces the processing time.
Ë Ë Ë Ë Ë Operation procedure
1. On the [TYPE RUN COND] menu, move the cursor to item "MESSAGE DISPLAY" with the up and
down keys, and press the SET key.
2. Move the cursor to "YES (W/DATA)," "YES (W/O DATA)" or "NO" with the left and right keys, and
press the SET key.
Ë Ë Ë Ë Ë Display examples
- When "YES" (with numeric results) is selected
(TYPE00)AREA1
OK
MEAS XXXXms XXXX-XX-XX XX:XX
MEASURE 0 CAM1 POSI-DEVIATION
0(0~7)
X0=176.0
Y0=322.0
x0=+000.0
y0=+000.0
M0=+10000
B0=+001.7
X1=534.0
Y1=480.0
x1=+001.0
y1=+001.0
M1=+09999
X0~7
CHG-MEA CHG-REG CHG-RST CHG-C1 CHG-C2 CHG-EVAL CUSTOM-MNU
OPS-CND MEA-CND SYS-CND CHG-TYPE NG-IMG-DSP NEXT-NG MANL-MEAS
- When "NO" is selected
[TYPE RUN COND]
2CAPTURE IMG
3MESSAGE DISPLAY YES(W/DATA) YES(W/O DATA) NO
4PATTERN DISPLAY YES NO
1
3 MESSAGE
DISPLAY
YES (W/DATA)
YES (W/O DATA)
NO
YES (NUMERIC) > YES (NO NUMERIC) > NO
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Y0~7 READY
Can be deleted by pressing the SET key.
PARTIAL-IMG WHOLE-IMG NO
2
Description
All data will be displayed.
Data other than the numerical result will not be displayed.
No messages will be displayed.
- When "YES" (without numeric results) is selected
F.IMG C1 L (TYPE00)AREA1
VX.X
OK
MEAS XXXXms XXXX-XX-XX XX:XX
MEASURE 0 CAM1 POSI-DEVIATION
X0~7
CHG-MEA CHG-REG CHG-RST CHG-C1 CHG-C2 CHG-EVAL CUSTOM-MNU
OPS-CND MEA-CND SYS-CND CHG-TYPE NG-IMG-DSP NEXT-NG MANL-MEAS
Press the
SET key
Press the
ESC key
CHG-MEA CHG-REG CHG-RST CHG-C1 CHG-C2 CHG-EVAL CUSTOM-MNU
OPS-CND MEA-CND SYS-CND CHG-TYPE NG-IMG-DSP NEXT-NG MANL-MEAS
2-6
Y0~7 READY
The menu bar will be displayed
F.IMG C1 L
VX.X