Operation Menu Display - Sharp IV-S30 User Manual

Setting the Operating and System Conditions

[7] Operation menu display

Select whether or not to display the MAIN, CHNG-EVAL (change evaluation), and PC MNTR menus on
the MAIN OPS MENU. To display the screens, press the "CHG-EVAL" item on the MAIN OPS MENU.
2
[TYPE RUN COND]
6SHOW
7OPS MENU DISPLAY MAINYES CHNG-EVALNO PC-MNTRNO
8THROUGH DISPLAY NO YES
1
4
OPS-MENU SAVE LOCK
7
OPS MENU
DISPLAY
CHNG-EVAL
PC MNTR
Ë Ë Ë Ë Ë Operation procedure
1. On the [TYPE RUN COND] menu, move the cursor to item "7OPS MENU DISPLAY" with the up
and down keys.
2. Move the cursor to the "MAIN," "CHNG-EVAL," or "PC MNTR" item using the left and right keys.
Select whether or not to enable the displays using the up and down keys.
3. Press the SET key to complete the settings.
4. Move the cursor to "OPS-MENU" and press the SET key.
- The screen will return to the MAIN OPS MENU.
(TYPE00)AREA1
OK
MEAS XXXXms 2000-08-01 10:30
MEASURE 0 CAM1 POSI-DEVIATION
6
X0~7
CHG-MEA CHG-REG CHG-RST
OPS-CND MEA-CND SYS-CND
5. Move the cursor to "CHG-EVAL" using the left and right keys.
6. Press the up and down keys.
- The screen display will change in the following sequence.
Main screen → evaluation condition screen → PC monitor screen → main screen → ...
FIX IMG YES NO
MAIN
Set the MAIN item to "YES," to display the operation main screen.
Set the CHNG-EVAL item to "YES" to display the evaluation
condition change screen.
Set the PC MNTR item to "YES" to display the PC monitor screen.
Y0~7
2
Description
READY
CHG-C1 CHG-C2 CHG-EVAL CUSTOM-MNU
CHG-TYPE NG-IMG-DSP NEXT-NG
2-10
6 to 8 display when
the MONITOR OUTPUT
is set to
"CAM1/CAM2/NG-IMG"
T.IMG C1 L
VX.X
C1=002.2 OK
C2=100.0 OK
NG IMG 0(X)
5
MANL-MEAS