Oracle Solaris Os Issues Fixed In Oracle Solaris 10 8/11 - Fujitsu SPARC Enterprise M3000 Product Notes

Oracle Solaris OS Issues and Workarounds for All Supported Releases (Continued)
TABLE 3-4
M4000
CR ID M3000 M4000
6765239 O
7009469 O
Oracle Solaris OS Issues Fixed in Oracle Solaris 10
8/11
TABLE 3-5
encounter them in supported releases earlier than Oracle Solaris 10 8/11.

Oracle Solaris OS Issues Fixed in Oracle Solaris 10 8/11

TABLE 3-5
M4000
CR ID M3000 M4000
6344060 O
6794630
6966086 O
50 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1112 • May 2012
M8000
M9000 Description
If a SAS device containing multiple SAS
targets is connected to the onboard
external SAS interface, it will not work
properly. The enumeration of target IDs
within the device may change across
reboots.
Creating a RAID configuration using
the raidctl(1M) command generates a
warning message on initial process.
Subsequent RAID configurations do
not.
lists issues that have been fixed in Oracle Solaris 10 8/11 OS. You might
M8000
M9000 Description
A lot of following ereports are
outputted when both interfaces bge1
and bge2 are in use.
ereport.io.device.badint_limit
ereport.io.service.lost
This issue is caused on the M3000
server with SPARC64 VII+ processors.
O An attempt to use the GUI to install
Oracle Solaris OS in a domain larger
than 2TB might fail.
bge interface can not enable Jumbo
Frame function.
This issue is caused on the M3000
server with SPARC64 VII+ processors.
Workaround
Use a FUJITSU SAS card
(SE0X7SA1F/SE0X7SA1X).
Alternatively, check for the availability
of a patch for this defect.
No workaround is available.
Workaround
This has been fixed in patch 144563-02.
[Workaround]
No workaround is available.
This has been fixed in patch 124630-45.
[Workaround]
Use the Command Line interface to
install Oracle Solaris OS.
This has been fixed in patch 144563-02.
[Workaround]
No workaround is available.