Completing The System Configuration - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
The whole procedure may take 15 minutes. When the installation completes, the system reboots.
When the system reboots the DVD is ejected.
8 Remove the DVD from the server and close the DVD drive.

Completing the System Configuration

To complete the system configuration:
1 Connect to the MCU using the default Polycom user name and Polycom password. For details, see
the RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Connection to MCU
2 Enter the activation key.
3 Define the IP Network Service for the media and signaling using the Fast Configuration Wizard. For
details, see the RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Configuration Wizard.
4 Optional: Restore the system configuration. For details, see
5 Remove the USB memory stick from the MCU.
The system recovery is complete.
Polycom®, Inc.
.
Procedure 3:
,
Software Management.
Fast
,
879