Generating San Zoning Reports - Brocade Communications Systems Brocade 8/12c User Manual

32

Generating SAN zoning reports

4. Click the close button (X) to close the View Reports dialog box.
5. Click the close button (X) to close the HIstorical Performance Table dialog box.
For more information about performance, refer to
Generating SAN zoning reports
The Management application enables you to generate a report for the current zone DB in the
fabric. To generate a report for the edited zone DB, you must save it to the fabric first. Make sure no
one else is making changes to the same area prior to submitting or your changes may be lost.
To generate zoning reports, complete the following steps.
1. Select Configure > Zoning or right -click the device and select Zoning.
2. Click Report.
3. Click OK on the message.
4. Click Close to close the View Reports dialog box.
5. Click Yes on the "are you sure you want to close" message.
928
g. Click Apply.
The selected report automatically displays in the View Reports dialog box.
NOTE
Hyperlinks in reports are active only as long as the source data is available.
To print the selected report, refer to
To export the selected report, refer to
To delete the selected report, refer to
The Zoning dialog box displays.
The selected report automatically displays in the View Reports dialog box.
NOTE
Hyperlinks in reports are active only as long as the source data is available.
To print the selected report, refer to
To export the selected report, refer to
To delete the selected report, refer to
"Printing SAN reports"
"Exporting SAN reports"
"Deleting SAN reports"
"Performance Data"
"Printing SAN reports" on page 926.
"Exporting SAN reports"
"Deleting SAN reports" on page 926.
Brocade Network Advisor SAN User Manual
on page 926.
on page 925.
on page 926.
on page 775.
on page 925.
53-1002167-01