Generating Zoning Reports - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

12

Generating zoning reports

4. Click the close button (X) to close the View Reports dialog box.
5. Click the close button (X) to close the HIstorical Performance Table dialog box.
For more information about performance, refer to
Generating zoning reports
The Management application enables you to generate a report for the current zone DB in the
fabric. To generate a report for the edited zone DB, you must save it to the fabric first. Make sure no
one else is making changes to the same area prior to submitting or your changes may be lost.
To generate zoning reports, complete the following steps.
1. Select Configure > Zoning or right -click the device and select Zoning.
2. Click Report.
3. Click OK on the message.
4. Click Close to close the View Reports dialog box.
5. Click Yes on the "are you sure you want to close" message.
324
g. Click Apply.
The selected report automatically displays in the View Reports dialog box.
NOTE
Hyperlinks in reports are active only as long as the source data is available.
To print the selected report, refer to
To export the selected report, refer to
To delete the selected report, refer to
The Zoning dialog box displays.
The selected report automatically displays in the View Reports dialog box.
NOTE
Hyperlinks in reports are active only as long as the source data is available.
To print the selected report, refer to
To export the selected report, refer to
To delete the selected report, refer to
For more information about zoning, refer to
"Printing reports" on page 322.
"Exporting reports"
"Deleting reports" on page 322.
"Performance Data"
"Printing reports" on page 322.
"Exporting reports" on page 321.
"Deleting reports" on page 322.
"Zoning" on page 603.
on page 321.
on page 287.
DCFM Enterprise User Manual
53-1001775-01