Enable Slb - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

SLB Commands

enable slb

Enables SLB processing.

Syntax Description

This command has no arguments or variables.

SLB is disabled by default.

Usage Guidelines

This command activates the following functions for transparent, translational, and port translation

• Exporting of VIP routes or proxy ARP for VIP addresses.

• Processing of VIP lookup and connection setup.

• Establishing communication with redundant SLB switches.

• Positively responding to MIB, 3DNS, and SeeIT requests.

Before you enable SLB, enable IP forwarding on the associated VLANs.

SLB cannot be enabled when MPLS or Destination-sensitive accounting is enabled or SLPM is active.

The following command enables SLB:

This command was first available in ExtremeWare 6.1.

This command was updated in an ExtremeWare IP Technology Services Release based on v6.1.8b12.

This command was modified in ExtremeWare 7.0.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0