Extreme Networks ExtremeWare Command Reference Manual page 642

Commands for Status Monitoring and Statistics
Example
The following command enables packet memory scanning on slot 1, and specifies that the module be
taken offline:
configure packet-mem-scan-recovery mode offline slot 1
The following command enables packet memory scanning on the MSM module in slot B, and specifies
that the module be kept online
configure packet-mem-scan-recovery mode online slot msm-b
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on BlackDiamond switches only.
642 ExtremeWare Software 7.3.0 Command Reference Guide