Configure Slb Pool Member - Extreme Networks ExtremeWare Command Reference Manual

configure slb pool member

configure slb pool <pool name> member <ip address>:[ftp | http | https |
imap4 | ldap | nntp | pop3 | smtp | socks | telnet | tftp | web | www |
<TCP or UDP port number>] [ratio <number> | priority <number>]
Description
Configures the ratio or priority of an existing pool member.
Syntax Description
pool name
ip address
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
www
TCP or UDP port number
ratio
priority
Default
The default ratio is 1.
The default priority is 1.
Usage Guidelines
Use this command to change the ratio or priority of an existing node. To add a node to a pool (and set
the ratio or priority), use the following command:
configure slb pool <pool name> add
Example
The following command changes the priority of the FTP node with an IP address of 10.2.1.2 in the pool
"ftp" to 2:
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a pool.
Specifies the IP address of the node.
Specifies an FTP node.
Specifies an HTTP node.
Specifies an HTTPS node.
Specifies an IMAP4 node.
Specifies an LDAP node.
Specifies an NNTP node.
Specifies a POP3 node.
Specifies an SMTP node.
Specifies a SOCKS node.
Specifies a telnet node.
Specifies a TFTP node.
Specifies a Web node.
Specifies a www node
Specifies a TCP or UDP port for the node.
Specifies the ratio for the ratio load balancing method. The range is 0 to 65,535.
Specifies the priority for the priority load balancing method. The range is 1 to 65535.
configure slb pool member
503