Commands for Managing the Switch
Use the following command to configure the user authMD5 to use
authentication with the password
MD5
palertyu:·
configure snmpv3 add user authMD5 authentication md5
palertyu
Use the following command to configure the user authSHApriv to use
authentication with the hex
SHA
key shown below, the privacy password palertyu, and
storage:
volatile
configure snmpv3 add user authShapriv authentication sha hex
01:03:04:05:01:05:02:ff:ef:cd:12:99:34:23:ed:ad:ff:ea:cb:11 privacy palertyu volatile
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
140
ExtremeWare Software 7.3.0 Command Reference Guide