Extreme Networks ExtremeWare Command Reference Manual page 727

Comp SubComp
------- ----------- ----------------------- ------------- ----------
STP InBPDU
The following command displays the details of the event condition PDUTrace in the component
STP.InBPDU:
show log events stp.inbpdu.pdutrace detail
The output produced by the above command is similar to the following:
Comp SubComp
------- ----------- ----------------------- ------------- ----------
STP InBPDU
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Condition
PDUDrop
PDUIgn
PDUTrace
Condition
PDUTrace
"Port=%1%: %0%"
Severity Parameters
Error 3
Debug-Summary 2
Info 2
Severity Parameters
Info 2 Total
0 - string
1 - ports
show log events
727