Create Route-Map - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

create route-map

create route-map <name>
Description
Creates a route map statement.
Syntax Description
name Specifies a route map name.
Default
N/A.
Usage Guidelines
Route maps are a mechanism that can be used to conditionally control the redistribution of routes
between two routing domains, and to modify the routing information that is redistributed.
Route maps are used in conjunction with the match and set operations. A match operation specifies a
criteria that must be matched. A set operation specifies a change that is made to the route when the
match operation is successful.
After a route map statement has been created, you must add entries to the route-map, and then add
statements to the route map entries.
Example
The following command creates a route-map named bgp-out:
create route-map bgp-out
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
858 ExtremeWare Software 7.3.0 Command Reference Guide