Commands for Accessing the Switch
Example
The following command defines a new password for the account admin:
configure account admin
The switch responds with a password prompt:
password:
Your keystrokes will not be echoed as you enter the new password. After you enter the password, the
switch will then prompt you to reenter it.
Reenter password:
Assuming you enter it successfully a second time, the password is now changed.
In ExtremeWare 4.1.19, the following command defines a new password, Extreme1, for the account
admin:
configure account admin Extreme1
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
68
ExtremeWare Software 7.3.0 Command Reference Guide