Extreme Networks ExtremeWare Command Reference Manual page 83

configure timezone
Example
The following command configures GMT offset for Mexico City, Mexico and disables automatic DST:
configure timezone -360 noautodst
The following four commands are equivalent, and configure the GMT offset and automatic DST
adjustment for the US Eastern timezone, with an optional timezone ID of EST:
configure timezone name EST -300 autodst name EDT 60 begins every first sunday april
at 2:00 ends every last sunday october at 2:00
configure timezone name EST -300 autodst name EDT 60 begins every 1 1 4 at 2:00 ends
every 5 1 10 at 2:00
configure timezone name EST -300 autodst name EDT
configure timezone -300 autodst
The following command configures the GMT offset and automatic DST adjustment for the Middle
European timezone, with the optional timezone ID of MET:
configure timezone name MET 60 autodst name MDT begins every last sunday march at 1
ends every last sunday october at 1
The following command configures the GMT offset and automatic DST adjustment for New Zealand.
The ending date must be configured each year because it occurs on the first Sunday on or after March 5:
configure timezone name NZST 720 autodst name NZDT 60 begins every first sunday
october at 2 ends on 3/16/2002 at 2
History
This command was first available in ExtremeWare 4.0.
Modified in ExtremeWare 6.2.1 to allow configuration of a beginning and ending time for the automatic
DST.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 83