Configure Ssl Certificate Pregenerated - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

configure ssl certificate pregenerated

Obtains the pre-generated certificate from the user.

Syntax Description

This command has no parameters or variables.

Usage Guidelines

This command is also used when downloading/ uploading the configuration. The certificate

information stored in the uploaded configuration file should not be modified, because it is signed using

the issuer's private key.

The certificate and private key file should be in PEM format and generated using RSA as the

cryptography algorithm.

The following command obtains the pre-generated certificate from the user:

configure ssl certificate pregenerated

Next, the user will open the certificate and then file, copy, and paste the certificate into the

console/telnet session, followed by a "." (period) to end the command.

This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.

Platform Availability

This command is available on Alpine 3800 series only.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0