Clear Slb Connections - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands

clear slb connections

clear slb connections {ipaddress <ip address> : <port> | vip <vip name>}
Description
Clears all existing SLB connections.
Syntax Description
ip address
port
vip name
Default
N/A.
Usage Guidelines
If you do not specify an IP address or a virtual server, all connections are cleared.
This interrupts all current connections, but does not prevent new connections from being established. To
prevent new connections from being established, disable SLB to each virtual server using the following
command:
disable slb vip <vip name> all
To prevent new connections from being established to a specific virtual server and simultaneously close
all current connections, use the following command:
disable slb vip <vip name> all close-connections-now
Example
The following command clears the connections to the virtual server "content":
clear slb connections content
History
This command was available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
438
Specifies an IP address.
Specifies a port.
Specifies a virtual server.
ExtremeWare Software 7.3.0 Command Reference Guide