Extreme Networks ExtremeWare Command Reference Manual page 855

Hide thumbs Also See for ExtremeWare:

Table of Contents

create access-list udp destination source ports

The following command defines an access-list rule named allow10_35 with precedence 70 that permits

udp port 35 traffic destined for other 10.X.X.X networks, and assigns QoS profile Qp2:

create access-list allow10_35 udp dest 10.0.0.0/8 ip-port 35 source any ip-port any

permit qosprofile qp2 ports any precedence 70

This command was first available in ExtremeWare 6.0, and replaced the

configure ipqos

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0