Extreme Networks ExtremeWare Command Reference Manual page 228

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Configuring Slots and Ports on a Switch

For MAC mirroring to work correctly, the MAC address must already be present in the forwarding

database (FDB). You need to enable and configure FDB for MAC mirroring to work correctly. See "FDB

Commands" for more details.

The following example sends all traffic coming into or out of a stand-alone switch on port 1 and the

VLAN default to the mirror port:

configure mirroring add ports 1 vlan default

The following example sends all traffic coming into or out of a modular switch on slot 3, port 2 and the

VLAN default to the mirror port:

configure mirroring add ports 3:2 vlan default

This command was first available in ExtremeWare 2.0.

This command was modified in ExtremeWare 4.0 to support modular switches.

This command was modified in ExtremeWare 6.0 to discontinue support for the MAC address

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0