Configure Sflow Sample-Rate - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure sflow sample-rate

configure sflow sample-rate <number>

Configures the sample rate at which the sFlow agent collects network traffic samples.

Syntax Description

Specifies the fraction (1/number) of packets to be sampled.

Usage Guidelines

This command configures the sample rate at which the sFlow agent collects network traffic samples.

One sample per

of packets received will be sent to the sFlow collector. If the sample rate is set

to '0' (zero), no samples will be sent to the collector.

The following command sets the sample rate to one packet out of every 10000:

configure sflow sample-rate 10000

This command was first available in ExtremeWare 7.3.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0