Extreme Networks ExtremeWare Command Reference Manual page 735

• Received Broadcast (RX Bcast)—The total number of frames received by the port that are addressed
to a broadcast address.
• Received Multicast (RX Mcast)—The total number of frames received by the port that are addressed
to a multicast address.
For version 2.0 and 4.0
• Disabled and Not Present are not available as link status indicators.
• Chassis is available as a link status indicator. If chassis is listed, the link is connected to a Summit
Virtual Chassis.
Example
The following command displays port statistics for ports 1 through 3 on a stand-alone switch:
show ports 1-3 stats
The following command displays port statistics for slot 1, ports 1 through 3 on a modular switch:
show ports 1:1-1:3 stats
The following command displays port statistics for all ports:
show ports stats
The output produced by the
Port Statistics
Port
================================================================================
1:1
1:2
1:3
1:4
1:5
1:6
1:7
1:8
The following command displays cable diagnostics information for all ports:
show ports stats cable-diagnostics
The output produced by the
following:
Port Statistics
Port
================================================================================
1:1
1:2
1:3
1:4
1:5
1:6
1:7
ExtremeWare Software 7.3.0 Command Reference Guide
show ports stats
Link Tx Pkt Tx Byte
Status Count Count
A 740131 61671211
A 292131 24686533
A 37273 4351318
R 0 0
R 0 0
A 1099 375858
R 0 0
A 1099 375858
show ports stats cable-diagnostics
Link Num
Status Diags
A 0
A 1
A 0
R 0
R 10
A 0
R 0
command is similar to the following:
Thu Jul 8 09:50:50 2004
Rx Pkt Rx Byte
Count Count
201310 17023242
896516 183343391
37578 4721313
0 0
0 0
11962 901306
0 0
0 0
Thu Jul 8 09:52:19 2004
Diags Diags
Success Fail
0 0
1 0
0 0
0 0
8 2
0 0
0 0
show ports stats
Rx Rx
Bcast Mcast
7 3963
37 21456
36 21551
0 0
0 0
4421 7541
0 0
0 0
command is similar to the
Diags
Change
0
0
0
0
0
0
0
735