Enable Snmp Dot1Dtpfdbtable - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
enable snmp dot1dTpFdbTable
enable snmp dot1dTpFdbTable
enable snmp dot1dTpFdbTable
Description
Enables SNMP GetNext responses for the dot1dTpFdbTable in the BRIDGE-MIB.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
SNMP Get responses are not affected by this command.
To view the configuration of the dot1dTpFdb table on the switch, use the
command.
show management
The
command displays information about the switch including the enable/disable
show management
state the dot1dTpFdb table.
To restore defaults to all SNMP-related entries, including the SNMP parameters modified using the
command, use the
command.
enable snmp dot1dTpFdbTable
unconfigure management
Example
The following command enables the dot1dTPFdb table:
enable snmp dot1dTpFdbTable
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
177
Advertisement
Table of Contents
