Show Slb Global - Extreme Networks ExtremeWare Command Reference Manual

show slb global

show slb global
Description
Displays the current SLB global configuration information.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Displays the following:
• Global enable/disable mode
• Global modes
• Default settings for health checker
• Failover configuration
Example
The following command displays the current SLB global configuration information:
show slb global
Following is the output from this command:
SLB: Enabled
SynGuard: Disabled
3DNS IQuery Support Status: Disabled
SLB persist-level: same-vip-same-port
SLB persistence-method: per-session
SLB pre-allocated connection-block size: 10000
SLB connection timeout: 1
SLB persistence on client proxies: Disabled
Proxy Client Persistence entries:
No. of Proxy Client Persistence entries: 0
#
#
Health Check Defaults:
Ping-check
Port-check
Service-check Frequency: 60
HTTPURL: "/"
Match String: (any-content)
FTP User: anonymous
Password: (not shown)
TelnetUser: anonymous
ExtremeWare Software 7.3.0 Command Reference Guide
Frequency: 10 Timeout: 30
Frequency: 30 Timeout: 90
Timeout: 180
show slb global
585