Show Snmpv3 User - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

show snmpv3 user

show snmpv3 user {{hex} <user name>}
Description
Displays detailed information about the user.
Syntax Description
hex
user name
Default
N/A.
Usage Guidelines
The
show snmpv3 user
command will display details for all the users. The authentication and privacy passwords and keys will
not be displayed.
The user entries in SNMPv3 are stored in the USMUserTable, so the entries are indexed by EngineID
and user name.
Example
The following command lists all user entries:
show snmpv3 user
The following command lists details for the specified user, testuser:
show snmpv3 user testuser
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
210
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the user name to display.
command displays the details of a user. If you do not specify a user name, the
ExtremeWare Software 7.3.0 Command Reference Guide