Disable Log Display - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

disable log display

Disables the sending of messages to the console display.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

If the log display is disabled, log information is no longer written to the serial console.

This command setting is saved to FLASH and determines the initial setting of the console display at

In ExtremeWare 7.1.0, the ability to control logging to different targets was introduced. The new

command equivalent to

is the following:

disable log display

disable log target console-display

The following command disables the log display:

disable log display

This command was first available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0