Extreme Networks ExtremeWare Command Reference Manual page 194

Commands for Managing the Switch
CLI idle timeouts:
CLI Paging:
CLI configuration logging:
Telnet access:
Web access:
Web access login timeout :
SSH Access:
UDP Echo Server:
SNMP Access:
SNMP Read Only Communities:
Total Read Only Communities:
SNMP Read Write Communities:
Total Read Write Communities:
SNMP dot1dTpFdbTable:
RMON polling:
SNMP Traps:
SNMP v1/v2c TrapReceivers:
Destination
10.255.254.22 /162
111.111.111.111/162
Flags: Version: 1=v1 2=v2c
Mode: S=Standard E=Enhanced
Trap Groups: s=STP b=BGP o=OSPF p=Ping/Traceroute v=VRRP y=System
SNMP MAC Security traps:
Link Up/Link Down traps enabled on ports: All, including MgmtPort
SNMP stats: inPkts 301
Gets 93
SNMP traps: sent 10
Login stats:
validLogins 3 badPasswords 0 unknownUSers 2(last bad user: admin1)
Telnet: total 3 valid 1 invalid 2
HTTP: total 0 valid 0 invalid 0
Management access stats:
Protocol UDP/TCP
-- --
Protocol Soures IP Address UDP/TCP
-- --
History
This command was first available in ExtremeWare 2.0.
Support for the SSH2 state, access profile information and RMON polling configuration was introduced
in ExtremeWare 4.0.
Additional information on traps configured per port port-up-down traps was added in ExtremeWare
6.2.2.
Additional information on mac-limit traps was added in ExtremeWare 7.0.0
194
disabled
enabled
enabled
enabled tcp port: 23
enabled tcp port: 80
30 secs
key invalid, disabled tcp port: 22
disabled udp port: 7
v1v2c disabled ; v3 enabled
rykfcb
1
r~`|kug
1
disabled
disabled
enabled
Community
public
ThisIsATestComm
e=Extreme m=Smart Traps a=Auth l=Link Up/Down r=RMON
c=Security
A=All
disabled
outPkts 302
GetNexts 208
authTraps enabled
Port Total packets
-- --
--
Source IP Address
errors 0
Sets 0
Rejected packets
--
Port Time
-- --
ExtremeWare Software 7.3.0 Command Reference Guide
Flags
2EA
2SA
authErrors 0