Extreme Networks ExtremeWare Command Reference Manual page 363

Hide thumbs Also See for ExtremeWare:

Table of Contents

create fdbentry vlan dynamic

• A port goes down (link down).

keyword, you can enable traffic from a QoS VLAN to have higher priority than

802.1p traffic. Normally, an 802.1p packet has a higher priority over the VLAN classification. To use this

feature, you must create a wildcard permanent FDB entry named

and apply the QoS profile to

the individual MAC entry.

You can use the

command to display permanent FDB entries, including their QoS

profile associations.

The following example associates the QoS profile qp2 with a dynamic entry for MAC address

00:A0:23:12:34:56 on VLAN net34 that will be learned by the FDB:

create fdbentry 00:A0:23:12:34:56 vlan net34 dynamic qosprofile qp2

QoS profile qp2 will be applied when the entry is learned.

The following example associates the QoS profile qp5 with the wildcard permanent FDB entry any-mac

on VLAN v110:

create fdbentry any-mac vlan v110 dynamic ingress-qosprofile qp5

This command was available in ExtremeWare 2.0.

Support for associating separate QoS profiles with ingress and egress ports was added in ExtremeWare

This command was modified in ExtremeWare 6.2.1 to support the

broadcast-mac

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0