Enable Slb Node Tcp-Port-Check - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands

enable slb node tcp-port-check

enable slb node [all | <ip address> : [ftp | http | https | imap4 | ldap |
nntp | pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or
UDP port number>]] tcp-port-check
Description
Enables layer 4 TCP-port-check.
Syntax Description
all
ip address
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
Default
TCP-port-check is disabled by default.
Usage Guidelines
To disable TCP-port-check, use the following command:
disable slb node tcp-port-check
Example
The following command enables all TCP-port-checks:
enable slb node all tcp-port-check
History
This command was first available in ExtremeWare 6.1.
568
Specifies all nodes.
Specifies an IP address.
Specifies an FTP node.
Specifies an HTTP node.
Specifies an HTTPS node.
Specifies an IMAP4 node.
Specifies an LDAP node.
Specifies an NNTP node.
Specifies a POP3 node.
Specifies an SMTP node.
Specifies a SOCKS node.
Specifies a telnet node.
Specifies a TFTP node.
Specifies a Web node.
Specifies any port associated with a wildcard server.
Specifies a www node
Specifies a TCP or UDP port for the node.
ExtremeWare Software 7.3.0 Command Reference Guide