Show Access-List-Monitor - Extreme Networks ExtremeWare Command Reference Manual

show access-list-monitor

show access-list-monitor
Description
Initiates the access-list information display, and refreshes it until discontinued.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This command initiates a display of real-time access list information. Use the keys as shown in Table 17
to change the view of the data. The [Esc] or [Return] keys will discontinue the display.
Table 17: Monitoring Display Keys
Key(s)
U
D
[Esc] or [Return]
0
Example
The following command initiates the access-list information display:
show access-list-monitor
The command displays output similar to the following:
Access List
========================================================================
test1
The Hit Count continues to be updated until you exit from the display or enter "0" to reset the count to
zero.
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Description
Displays the previous page of ports.
Displays the next page of ports.
Exits from the screen.
Clears all counters.
Proto Destination
ip 0.0.0.0/0
Source Hit Count
0.0.0.0/0 1922
show access-list-monitor
921