Extreme Networks ExtremeWare Command Reference Manual page 590

SLB Commands
Following is the output from this command:
IP
Node IP Address Flags
1.111.1.1 E--H--
1.111.1.2 E--H--
1.111.1.3 E--H--
Flags: E - Enable,
P - Health check passed,
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
590
Freq/ TCP/UDP
Timeout Port
10/30 80
10/30 80
10/30 80
U - Up, R - IP Route Up,
! - VLAN not configured with "slb-type"
Frequency/Max
Flags Timeout#PoolsConns
E--- 30/90 2(no limit)
E--- 30/90 2(no limit)
E--- 30/90 2(no limit)
H - Health check enabled,
ExtremeWare Software 7.3.0 Command Reference Guide