Configure Slb Pool Lb-Method - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands

configure slb pool lb-method

configure slb pool <pool name> lb-method [least-connections | priority |
ratio | round-robin]
Description
Configures the SLB load balancing method.
Syntax Description
pool name
least-connections
priority
ratio
round-robin
Default
N/A.
Usage Guidelines
Use this command to change the load balancing method after you have already created a pool.
To set the ratio or priority of a node, use the following command:
configure slb pool <pool name> member
Example
The following command changes the load balancing method for the pool "ftp" to ratio:
configure slb pool ftp lb-method ratio
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
502
Specifies a pool.
Specifies the least connections load balancing method.
Specifies the priority load balancing method.
Specifies the ratio load balancing method.
Specifies the round robin load balancing method.
ExtremeWare Software 7.3.0 Command Reference Guide