Extreme Networks ExtremeWare Command Reference Manual page 1022

Hide thumbs Also See for ExtremeWare:

Table of Contents

STP Commands

The following command adds ports 2 and 3, members of a VLAN named Marketing, to the STPD named

STPD1, and specifies that they be in EMISTP mode:

configure vlan marketing add ports 2-3 stpd stpd1 emistp

This command was first available in ExtremeWare 6.2.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0