Configure Slb Global Connection-Block - Extreme Networks ExtremeWare Command Reference Manual

configure slb global connection-block

configure slb global connection-block
configure slb global connection-block <number>
Description
Configures the number of SLB connections to allocate in memory, which improves performance.
Syntax Description
number Specifies the number of connection blocks. The range is 100 to 20,000.
Default
The default is 10,000.
Usage Guidelines
Use this command when you are sure that you will have a minimum guaranteed number of
connections. Additional connection blocks are allocated when necessary.
Do not use this command unless you are absolutely sure that you will use the memory allocated.
Example
The following command allocates memory for 500 connections:
configure slb global connection-block 500
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 459