SLB Commands
configure slb node tcp-port-check
configure slb node <ip address>:[ftp | http | https | imap4 | ldap | nntp |
pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or UDP
port number>] tcp-port-check frequency <seconds> timeout <seconds>
Description
Overrides the global default frequency and timeout values for this node.
Syntax Description
ip address
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
frequency
timeout
Default
The default frequency is 30 seconds.
The default timeout is 90 seconds.
Usage Guidelines
To set the global TCP-port-check frequency and timeout, use the following command:
configure slb global tcp-port-check
The frequency must be less than the timeout.
496
Specifies the IP address of the node.
Specifies the FTP TCP-port-check.
Specifies the HTTP TCP-port-check.
Specifies the HTTPS TCP-port-check.
Specifies the IMAP4 TCP-port-check.
Specifies the LDAP TCP-port-check.
Specifies the NNTP TCP-port-check.
Specifies the POP3 TCP-port-check.
Specifies the SMTP TCP-port-check.
Specifies the SOCKS TCP-port-check.
Specifies the telnet TCP-port-check.
Specifies the TFTP TCP-port-check.
Specifies the Web TCP-port-check.
Specifies any port associated with a wildcard server.
Specifies the www TCP-port-check.
Specifies a TCP or UDP port for the TCP-port-check.
Specifies the frequency of the TCP port check. The range is 5 to 120 seconds.
Specifies the timeout of the TCP port check. The range is 5 to 300 seconds.
ExtremeWare Software 7.3.0 Command Reference Guide