Extreme Networks ExtremeWare Command Reference Manual page 375

Total: 33 Static: 16 Perm: 0 Locked: 0 Secure: 0 Dynamic: 17 Dropped: 0
Questionable: 0 Remapped: 0
FDB Aging time: 300 seconds
The following command displays information about the permanent entries in the FDB:
show fdb permanent
It produces output similar to the following:
EQP IQP Index
--------------------------------------------------------------------------------
QP3 QP2 ----- --- 00:10:E3:1D:00:05
QP3 QP2 4e610-206 00:01:03:2F:38:EE
QP3 QP2 ----- --- 00:60:B0:F9:58:9D
Flags: (B) Egress Blackhole, (b) Ingress Blackhole, (d) Dynamic, (s) Static
(p) Permanent, (m) MAC, (S) secure MAC, (l) lockdown MAC, (M) Mirror
(i) IP, (x) IPX, (z) translation MAC, (Q) Questionable, (R) Remapped
[ ] : authorize port list
Total: 3 Secure: 0
History
This command was available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.2.1 to support the
This command was modified in ExtremeWare 6.2.2b108 to support the
The option was not supported in ExtremeWare 7.0.
remap
This option is supported in ExtremeWare 7.1.0.
remap
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Mac Vlan
anntest1(4094) pm
anntest1(4094) spm
Default(0001) pm
Flags Port List
---
---
---
option.
broadcast-mac
option.
remap
show fdb
375