Show Enhanced-Dos-Protect - Extreme Networks ExtremeWare Command Reference Manual

show enhanced-dos-protect

show enhanced-dos-protect [rate-limit | ipfdb] ports [<portlist> | all]
Description
Displays the status of the enhanced denial of service protection feature.
Syntax Description
rate-limit
ipfdb
portlist
all
Default
N/A.
Usage Guidelines
The output from this command displays status of the following enhanced denial of service protection
conditions:
• Enabled/Disabled
• Max. entries
• Current entries
• List of trusted/untrusted ports
• Rate limiting configuration
• Packet filtering statistics
Example
The following command shows global enhanced denial of service protection rate limit information:
show enhanced-dos-protect rate-limit
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Displays rate limiting configuration.
Displays IPFDB learning qualifier configuration.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots a nd ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies all ports.
show enhanced-dos-protect
927