Extreme Networks ExtremeWare Command Reference Manual page 116

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Managing the Switch

configure snmp add trapreceiver ipaddress 10.203.0.22 port 9990 community public mode

standard trap-group extreme-traps, bgp-traps

This command was first available in ExtremeWare 1.0.

This command was modified in ExtremeWare 6.2.1 to support the

, and source (

This command was modified in ExtremeWare 6.2.2 to add the

This command was modified in ExtremeWare 7.1.0 to add trap groups and the

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0