Disable Sflow Backoff-Threshold - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Status Monitoring and Statistics

disable sflow backoff-threshold

Disables the sFlow backoff-threshold feature, which limits the maximum number of packets sent to the

sFlow collector per second.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

This command disables the backoff threshold feature, which is used to limit the number of packets sent

to the sFlow collector in a second. The backoff threshold is set by using the following command:

configure sflow backoff-threshold

If the number of packets sent to the collector exceeds the limit set by the

configure sflow

command, the sampling rate will be doubled.

backoff-threshold

The backoff threshold is enabled when the

command is executed

enable sflow backoff-threshold

and the sample rate set by the

command is greater than 0 (zero).

configure sflow sample-rate

The following command disables the sFlow backoff threshold feature:

disable sflow backoff-threshold

This command was first available in ExtremeWare 7.3.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0