Extreme Networks ExtremeWare Command Reference Manual page 59

Hide thumbs Also See for ExtremeWare:

Table of Contents

Command Reference Overview

Introduction

This guide provides details of the command syntax for all ExtremeWare commands as of

ExtremeWare version 7.3.0.

ExtremeWare 7.3.0 only supports Extreme Networks products that contain the "i" or "3" series chipset.

This includes the BlackDiamond, Alpine, and Summit "i" series platforms, but does not include the

Summit e-series and Summit 200 series platforms.

This guide does not provide feature descriptions, explanations of the technologies, or configuration

examples. For information about the various features and technologies supported by Extreme Networks

switches, see the installation and user guides for your product. This guide does not replace the

installation and user guides; this guide supplements the installation and user guides.

This guide is intended for use by network administrators who are responsible for installing and setting

up network equipment. It assumes a basic working knowledge of the following:

• Local area networks (LANs)

• Ethernet concepts

• Ethernet switching and bridging concepts

• Routing concepts

• Internet Protocol (IP) concepts

• Routing Information Protocol (RIP) and Open Shortest Path First (OSPF) concepts

• Border Gateway Protocol (BGP-4) concepts

• IP Multicast concepts

• Distance Vector Multicast Routing Protocol (DVMRP) concepts

• Protocol Independent Multicast (PIM) concepts

• Internet Packet Exchange (IPX) concepts

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0