Extreme Networks ExtremeWare Command Reference Manual page 993

Primary port: 13
Secondary port: 14
Hello Timer interval: 1 sec
Preforwarding Timer interval: 3 sec
Last update: From Master Id 00:01:30:B9:4B:E0, at Tue May 6 12:49:25 2003
Eaps Domain has following Controller Vlan:
Vlan Name
"rhsc"
EAPS Domain has following Protected Vlan(s):
Vlan Name
"traffic"
Number of Protected Vlans: 1
The following command displays EAPS information:
show eaps eaps2
The results for a transit node are shown as follows:
Name: "eaps2" (instance=1)
State: Link-Down
Enabled: Yes
Primary port: 3
Secondary port: 2
Hello Timer interval: 1 sec
Preforwarding Timer interval: 6 sec
Last update: From Master Id 00:01:30:B9:4B:E0, at Tue May 6 12:49:25 2003
EAPS Domain has following Controller Vlan:
Vlan Name
"cv2"
Number of Protected Vlans: 2
The following command displays summary EAPS information:
show eaps summary
The results for this command are as follows:
EAPS Enabled: Yes
Number of EAPS instances: 1
EAPSD-Bridge links: 2
Domain
------------
eaps1
History
This command was first available in ExtremeWare 6.2.
The
summary
This command was modified in ExtremeWare 7.1 to display primary and secondary ring-ports and
show the status of the failtimer.
ExtremeWare Software 7.3.0 Command Reference Guide
Port status: Up
Port status: Up
VID
0020
VID
1001
[Running: Yes]
Mode: Transit
Port status: Down
Port status: Up
VID
4002
State Mo En
------------ -- -- ------- -------
Complete M Y
option was added in ExtremeWare 6.2.2.
Tag status: Tagged
Tag status: Tagged
Fail Timer interval: 3 sec
QosProfile
QP8
Tag status: Tagged
Tag status: Tagged
Fail Timer interval: 3 sec
QosProfile
QP8
Pri Sec
Port Port Control-Vlan (VID)Count
-----------------------
1 2 cv1
show eaps
Vlan
(1001) 1
993