Extreme Networks ExtremeWare Command Reference Manual page 272

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Configuring Slots and Ports on a Switch

The following example selects port 3 as a tagged mirror port on a stand-alone switch:

enable mirroring to port 3 tagged

The following example selects slot 1, port 3 as the mirror port on a modular switch:

enable mirroring to port 1:3

This command was first available in ExtremeWare 2.0.

This command was modified in ExtremeWare 4.0 to support the

keywords and

tag | untagged

modular switches.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0